You Are Here: Home » Flooring » Installing Hardwood Flooring On Concrete: Some Steps To Follow

Installing Hardwood Flooring On Concrete: Some Steps To Follow

Hardwood flooring is always a good option for private residences or offices. If you already have a concrete floor on the ground floor or basement, hardwood flooring can add a warmer touch. You might want to lay hardwood over concrete by gluing it down rather than nailing it. The process of gluing and nailing is quite different so you need to talk to a team member at your nearest home improvement store to get the proper glue and flooring. It is better for you to remember that not all wood flooring can be installed this way. Due to this reason, you are recommended to consult the floor manufacturer. If you are thinking about installing hardwood flooring on concrete, you can follow some tips below.

Before installing hardwood flooring on concrete, you need to prepare some items. These include flooring glue, adhesive trowels, shims, a miter saw, table saw, and floor trim. The first thing to do is spread the flooring glue down. You can use the adhesive trowel to spread the glue. Make sure you spread it all along the side of the floor where you are starting and come out from the wall by about 2 feet. It is highly recommended for you not to start where the entrance is. Before starting to spread the glue down, you need to remove any dirt from the floor. You have to clean the floor thoroughly for best results.

Next, you should lay the first flooring course in place with the grooves of the boards facing the wall. In installing hardwood flooring on concrete, you need to put the shims between the edges of boards and wall. Put the shims with the thick sides of the shim facing down. It is done to create a gap. By doing this, you will be able to let the floor to expand. You need to connect the ends of the floorboards to each other by using their tongue and groove milling. It is important for you to ensure the course to fit. In some cases, you need to cut the last board to fit. You can use the miter saw to cut the board. When you are installing hardwood flooring on concrete, you need to work your way across the floor until you are running out of space. After you complete those processes, you need to let the glue dry for overnight.

Installing Hardwood Flooring On Concrete

When installing hardwood flooring on concrete, you should complete the last part of the flooring on the next day. Do this step when you are already able to stand on boards which were installed previously. The boards for the final step might not fit perfectly. You can use the table saw to cut the boards in the final step according to their lengths. You will see a small gap at the wall. After that, you need to pull out the shims and lay the floor trim around the edges of the floor. This is done to cover the gaps.

Installing Hardwood Flooring On Concrete

It is important for you to ventilate the room when you are applying the glue. When you are installing hardwood flooring on concrete, make sure you leave the flooring for 10-12 hours. The glue needs to get very dry.

  • Images from: reclaimedfloors.net, pipeta.org, flooringhunt.com, prweb.com


Copyright © 2013 Creative Home Designer

You might also likeclose
Scroll to top